Red's Equipment Warehouse, Inc

Automotive Garage Shop Equipment & Tire Shop Tools

Lifts: Heavy-Duty

Rotary Heavy-Duty Lifts (over 14,000 lbs)

The direction of heavy-duty vehicle maintenance is changing. Now, the productivity of your fleet depends on your ability to do routine maintenance and repairs fast and efficiently – from under the vehicle. That’s why investing in an automotive lift boosts your bottom line. It improves technician access to dramatically speed up maintenance and repairs.

Rotary Lift sells more lifts than anyone else in the world. They’re built for years of dependable service, and they deliver on it consistently. All supported by a computerized parts system and by a network of trained installation and service specialists.

MACH 4 Series

The MACH4 Plus picks up where the MACH4 left off. Completely portable and essentially 2 lifts in 1, the Mach4 Plus makes four post lifts a thing of the past! Fewer moving parts, no dedicated or complicated electrical wiring, no cables or sheaves to maintain, reducing installation time and maintenance costs, making the MACH4 plus one of the most efficient and affordable lifts to date.

MACH4MACH4 Plus

Standard Features

  • 60,000 lb. lifting capacity
  • Battery operated [(2) 12V DC] with waterproof on-board Minn Kota charger.
  • No dedicated or complicated electrical wiring needed because of DC Power and 110V recharging
  • Controlls at all 4 columns
  • Lift can be easily converted between a MACH4 and a 4 Post Heavy Duty Drive-on
  • Accommodates wheelbases up to 33′ or 396″
  • Fully functional when the power goes out
  • Internal airlines included for riolling jacks and air tools

Options

  • The optional 25k bridge can be attached to the MACH4 Plus runway to create various lifting options to make it even more versatile.
  • High-efficiency, environmentally friendly LED lighting system provides hands-free lighting under the vehicle.
  • Convieniently operated from lift’s control panel with single touch operation.

Available Models: MCH418 with M140015 runway system attached

MCH418MCH418

Standard Features

  • (4) mobile columns accomodating heavy duty trucks and light duty passenger vehicles
  • Automatic steering system
  • Battery operated (24V DC) with on-board charger
  • Easy to move adjustable forks
  • Retractable cord reels
  • 70″ of rise
  • (4) 18,000 lbs. capacity columns (72,000 lbs. capacity total)

Options

  • Extended fork kit
  • Light kit
  • Pendant control
  • Wheel engaging cross beam
  • Frame engaging cross beam
  • Jack stands

Available Models: MCH418

MCH618MCH618

Standard Features

  • (6) mobile columns to lift the heaviest of trucks
  • Automatic steering system
  • Battery operated (24V DC) with on-board charger
  • Easy to move adjustable forks
  • Retractable cord reels
  • 70″ of rise
  • (6) 18,000 lbs. capacity columns (108,000 lbs. capacity total)

Options

  • Extended fork kit
  • Light kit
  • Pendant control
  • Wheel engaging cross beam
  • Frame engaging cross beam
  • Jack stands

Available Models: MCH618

RCH4 Mobile ColumnRCH4 Mobile Column

Standard Features

  • (4) mobile columns accomodating heavy duty trucks and light duty passenger vehicles
  • Automatic steering system
  • Battery operated (24V DC) with on-board charger
  • Fixed forks fit most large truck tires without adjustment (reducer sleeves available)
  • Quick connect cables – 33′ long
  • Set up is over 30% faster than similar competitive lifts
  • (4) 18,000 lbs. capacity columns (72,000 lbs. capacity total)

Options

  • Reducer sleeves
  • LED Light kit
  • Large wheel riser kit
  • Optional weight gague
  • Jack stands

Available Models: RCH4, RCH6, RCH8

Wireless Mach4Wireless Mach4

Standard Features

  • Position Memory – no need to configure columns for
  • each lifting cycle…set it and forget it.
  • Reliability under any condition – go from wired to
  • wireless and back with the “flip of a switch”.
  • Automatically re-establishes communication between
  • columns if signal is dropped – no need to reset
  • communication errors.
  • No RFID identifier wand to lose
  • On-board diagnostics with easy-to-read LEDs.
  • Forward compatible / programmable – quick, easy
  • software updates.
  • Retrofitable with non-wireless MACH units.

Options

  • Extended fork kit
  • Light kit
  • Pendant control
  • Wheel engaging cross beam
  • Frame engaging cross beam
  • Jack stands

MOD30 or Modular Inground:

The MOD30 inground lift is totally contained in a 6’ enclosure protected with Rotary’s exclusive Enviroguard coating. This environmentally friendly lift is the most versatile and inventive lift ever to hit the truck service industry.

MOD30MOD30

Standard Features

  • Unobstructed floor
  • Galvanized shutter plate trench covers
  • Patented universal saddle adapters
  • Electric drive with custom presets for incredible quick spotting of vehicles
  • Synchronized multi-stage cylinder allows for housing depth to be only 6 feet
  • Containment style design gives easy access to all components
  • Containment features Enviro-Guard™ reducing electrolysis and deterioration
  • Multi-stage locks
  • LDS™ (Liquid Detection System) signals technician if fluid builds up in the containment
  • Upright control console with joystick controls
  • ALI Certified
  • 60,000 lbs. capacity (2-Post) 90,000 lbs. capacity (3-Post)

Options

  • Pendant control
  • 2 and 3-Post models available

Available Models: MOD30

Heavy Duty Two-Post

All of Rotary’s award winning light duty features can be found on our heavy duty two-post lifts. With available capacities up to 18,000 pounds and options like extended heights and dual controls, you can rest assured we have a lift for your job.

SPO15SPO15

Standard Features

  • “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
  • Thread up adapters
  • Comes with (6) additional adapters for an additional 10″ of reach
  • ALI Certified
  • 15,000 lbs. capacity

Options

  • Low ceiling model available (as low as 13′ 6″ overall height)
  • inbay (S15i) models include: Up/Down, lock controls on each column with air and electric outlets

Available Models: SPO15, S15i

SPO18SPO18

Standard Features

  • “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
  • Thread up adapters
  • Comes with (6) additional adapters for an additional 10″ of reach
  • ALI Certified
  • 18,000 lbs. capacity

Options

  • Low ceiling model available (as low as 13′ 6″ overall height)
  • inbay (S18i) models include: Up/Down, lock controls on each column with air and electric outlets

Available Models: SPO18, S18i

Heavy Duty Four-Post

Rotary’s heavy duty four-post lifts accommodate a wide range of vehicles with lifting capacities up to 60,000 lbs.

h4p40000_HDL40000 HDL

Standard Features

  • Locking latches is each leg for maximum security
  • Non-skid surface for sure grip
  • Heavy-duty chains keep runways level
  • Fully adjustable runway track width
  • I-Beam construction in runways for maximum capacity
  • Front wheel stops
  • (2) 2HP motors and two cylinders
  • 40,000 lbs. capacity

Options

  • Rolling Jacks
  • Alignment models
  • Internal airline kit
  • Drive-thru ramps
  • Single and 3-Phase motors available

Available Models: 40000HDL

60000HDL60000HDL

Standard Features

  • Locking latches is each leg for maximum security
  • Non-skid surface for sure grip
  • Heavy-duty chains keep runways level
  • Fully adjustable runway track width
  • I-Beam construction in runways for maximum capacity
  • Front wheel stops
  • (2) 2HP motors and two cylinders
  • 60,000 lbs. capacity

Options

  • Rolling Jacks
  • Alignment models
  • Internal airline kit
  • Drive-thru ramps
  • Single and 3-Phase motors available
  • 50,000 lbs. capacity model also available (50000HDL)

Available Models: 50000HDL, 60000HDL

Parallelogram

The parallelogram lift system is convenient for facilities and technicians. No column obstructions and a clear floor design allows for a productive work area. Numerous capacities and options make this lift an industry leader.

4 Leg Lifts4 leg models

25/26-S

  • 25,000 lbs. Capacity
  • Runway Style parallelogram lift
  • 26′ runway length
  • Surface mount

36/28-S 36/28-F

  • 36,000 lbs Capacity
  • Runway style parallelogram lift
  • 28′ runway length
  • Surface or Flush mount available

50/26-S 50/26-F

  • 50,000 lbs Capacity
  • Runway style parallelogram lift
  • 26′ runway length
  • Surface or Flush mount available

6 Leg Lifts6 leg models

45/35-S 45/35-F

  • 45,000 lbs. Capacity
  • Runway style parallelogram lift
  • 35′ runway length
  • Surface or Flush mount available

50/28-S 50/28-F

  • 50,000 lbs. Capacity
  • Runway style parallelogram lift
  • 28′ runway length
  • Surface or Flush mount available

75/30-S 75/30-F

  • 70,000 lbs. Capacity
  • Runway style parallelogram lift
  • 30′ runway length
  • Surface or Flush mount available

50/32-S 50/32-F

  • 50,000 lbs. Capacity
  • Runway style parallelogram lift
  • 32′ runway length
  • Surface or Flush mount available

8 Leg Lifts8 leg models

75/48-S 75/48-F

  • 75,000 lbs. Capacity
  • Runway style parallelogram lift
  • 48′ runway length
  • Surface or Flush mount available

100/42-S 100/42-F

  • 100,000 lbs. Capacity
  • Runway style parallelogram lift
  • 42′ runway length
  • Surface or Flush mount available

Traditional Inground

Rotary traditional Inground lifts are the ultimate in creating productive service bays. Multiple configurations, capacities and accessory packages allow you to customize your lift to your heavy duty lifting needs.

Traditional IngroundInground Traditional

Standard Features

  • Front jack can be adjusted for multiple wheelbases
  • Rear jack features recessed pocket for unobstructed floor
  • Continuous trench design for easy access to all components
  • Front pit covers to eliminate openings in the pit
  • Surface mounted power unit

Options

  • Recessed pocket for front jack
  • In-trench power unit
  • Push button equalized controls
  • Shutter plate trench covers

Multiple Models Available

Suspended Pit Lift

A suspended pit lift rides on a rail at the floor grade area and needs specific structural requirements to safely use the product. Rotary pit lifts have benefits that will enhance your productivity and efficiency. Pit lifts are designed for effortless moving and sliding in the pit.

suspendedSuspended Pit Lift

Standard Features

  • Needle roller bearings permit effortless rolling of the lift
  • Hydro-pneumatic forced return allows for rapid piston retraction
  • Chrome plated pistons for greater corrosion resistance
  • Cylinders bathed in oil with every operation
  • Fine adjustment stroke for more precise control
  • 30,000 lbs. capacity

Options

  • Pit covers
  • Multiple adapters
  • Cross beams
  • Support bridge

Available Models: GHUSLP14

Floor Running Pit Lift

Rotary Floor-running pit lifts are offered in two types, a free floor-running model with caster wheels or mounted to a rail system for cracked or uneven pit floors. Floor-running pit lifts provide extra flexibility, and rail-mounted lifts offer maximum freedom of movement inside the pit.

GHUSFFT14GHUSFFT14

Standard Features

  • GHSFFT14 comes with wheels for easy repositioning
  • Needle roller bearings permit effortless rolling of the lift
  • Hydro-pneumatic forced return allows for rapid piston retraction
  • Chrome plated pistons for greater corrosion resistance
  • Cylinders bathed in oil with every operation
  • Foot pedal controls requiring minimal effort to raise and lower the lift
  • Single action foot pump for fine adjustments when raising
  • Two-stage telescoping cylinder
  • 30,000 lbs. capacity

Options

  • Pit covers
  • Multiple adapters
  • Cross beams
  • Support bridge

Available Models: GHUSFFT14

GHUSFT14GHUSFT14

Standard Features

  • Needle roller bearings permit effortless rolling of the lift
  • Hydro-pneumatic forced return allows for rapid piston retraction
  • Chrome plated pistons for greater corrosion resistance
  • Cylinders bathed in oil with every operation
  • Foot pedal controls requiring minimal effort to raise and lower the lift
  • Single action foot pump for fine adjustments when raising
  • Two-stage telescoping cylinder
  • 30,000 lbs. capacity

Options

  • Pit covers
  • Multiple adapters
  • Cross beams
  • Support bridge

Available Models: GHUSFT14

Comments are currently closed.