Aktota

Model # 425S

Deluxe Gas Powered Cold Water Pressure Washer

Model # 425S

Capacity 4 GPM Pressure 2500 PSI Engine / Motor 9 HP, Vanguard, Oil Alert, Overhead Valve Pump Triplex, Oil Bath, Ceramic Plungers Hose 3/8″ x 50″ Wand Trigger  Model # 435S

Rotary Lifts

SmartLift Trio(2)

Standard Features

• Lower Profile Yoke = Greater Drive Thru Clearance
• New 2-Piece, 3-Stage Arm Operates Like Three
• 18% Greater Reach in a Shorter Arm!
• Recessed Bolts Provide a Smoother Drive-Over
• Improved Drive Over Pad is Lower with a more contoured profile that allows for easier entry and exit to service bays.
• New Storage Compartment provides easy access for technicians to keep small parts and tools during vehicle service.
• Patent Pending Multi-Position Adapter Slider adjustment easily slides to a pinpoint location.
• Three-position flip-up adapters allow quick positioning on a variety of pick up points.
• Polymer RA adapters screw into position and are ideal for unibody vehicles

Options

• inbay® (SL210i, 212i) model includes:
• One touch power unit (mounted on wall or on a stand)
• Patented Liquid Detection System™ (LDS)
• 3-stage arms for greater extension and retraction (SL210 only)

Available Models: SL210, SL210i, SL212, SL212i

2 Post Frame Engaging

Standard Features

• 2 Plunger design gives full under vehicle access
• No EPA concern – environmentally friendly and fully contained in a polymer composite housing
• 8 1/2″ diameter plunger
• Patented EasyAccess™ cylinder design – reduces service time up to 75%
• Third party certified
• SL210 comes standard with 3-position flip-up adapters (RA adapters and Truck adapters available)
• SL212 comes standard with Truck adapters
• 10,000 lbs. – 12,000 lbs. capacity

Options

• inbay® (SL210i, 212i) model includes:
• One touch power unit (mounted on wall or on a stand)
• Patented Liquid Detection System™ (LDS)
• 3-stage arms for greater extension and retraction (SL210 only)

Available Models: SL210, SL210i, SL212, SL212i

Standard Features

• Allows for quick and accurate vehicle spotting and lifting
• No center obstructions
• Extremely low 2 3/8″ profile
• Zero obstructions when exiting the vehicle
• Adjustable pads for accurate spotting of short and long vehicles
• No EPA concern – environmentally friendly and fully contained in a polymer composite housing
• 8 1/2″ diameter plunger
• Patented EasyAccess™ cylinder design – reduces service time up to 75%
• Third party certified
• 8,000 lbs. capacity

Options

• inbay® (SL210i, 212i) model includes:
• One touch power unit (mounted on wall or on a stand)
• Patented Liquid Detection System™ (LDS)

Available Models: SL210-MP8, SL210i-MP8

Rotary Lifts

Four Post General Service

Versatility: it’s the standard to which Rotary Lift’s four-post lifts are built. These lifts handle cars, vans, trucks – even light and medium duty commercial vehicles with ease. If you service a wide variety of vehicles, Rotary four-post auto lifts are the right choice for maximum productivity.

Available Models

• 4P Open Front: SMO14L
• 4P Closed Front: SM14L, SM18L, SM30L
• 4P Forklift: RFL25
• 4P Limousine: SM101

Closed Front

Standard Features (SM14)

• Cylinder located under the runway
• Dual function Sentinel Lock™ System
• Air Filter/Regulator/Lubricator
• Adjustable latch bars
• Single piece non-welded runway with tracks for rolling jacks
• ALI Certified
• 14,000 lbs. capacity

Options (SM14)

• Internal airline kit
• Rolling Jacks
• Bolt-on alignment kit
• Shorter or Longer runway lengths

Standard Features (SM18, SM30)

• Cylinder located under the runway
• Dual function Sentinel Lock™ System
• Air Filter/Regulator/Lubricator (standard on SM18, optional on SM30)
• Internal airline (standard on SM30, optional on SM18)
• Adjustable latch bars
• Single piece non-welded runway with tracks for rolling jacks (SM18)
• ALI Certified
• 18,000 lbs. capacity (SM18)
• 30,000 lbs. capacity (SM30)

Options (SM18, SM30)

• Rolling Jacks
• Bolt-on alignment kit
• Shorter or Longer runway lengths

Available Models: SM14, SM18, SM30

Four Post Forklift

Standard Features

• Cylinder located under the runway
• Dual function Sentinel Lock™ System
• Adjustable latch bars
• 25,000 lbs. capacity

Options

• Internal airline kit
• Air Filter/Regulator/Lubricator
• Rolling Jacks

Available Models: RFL25

Four Post Limousine

Standard Features

• Cylinder located under the runway
• Dual function Sentinel Lock™ System
• Air Filter/Regulator/Lubricator
• Adjustable latch bars
• Single piece non-welded runway with tracks for rolling jacks
• 10,000 lbs. capacity

Options

• Internal airline kit
• Rolling Jacks
• Bolt-on alignment kit

Available Models: SM101

Quick Lube Lift

Increase your oil change revenue with Rotary Lift’s NEW Quick Lube Lift! Our Gold Certified QL12 Quick Lube Lift comes with Modular Configurations available as kits to connect fixed mezzanines in mult-bay systems that you can work on multiple lifts without having to walk up and down the ladder. Three kits, six options, and other configurations are possible due to the QL12′s unique modular design.

Standard Features (QL12)

• 12,000 capacity will service most cars and light trucks
• Multiple configurations to meet variable bay sizes
• 4 horsepower motor for faster rise
• Lifting cylinder under the runway
• Chrome plated pins, heavy duty sheaves and cables
• 30 gallon (120 quart) oil drain pan included
• Non-skid coating on ladder steps
• ETL tested and certified
• Lifts available with or without ladders (must specify when ordering)
• QL12 – cable driven four post quick lube. Ladder (optional) located on right hand side. Can be combined in multiple units for multi-bay operation

Platform Kit (S100111)

• Allows access to lifts without ladders
• Flooring included but not shown
• Comes with safety gates to replace railing
• Approximate overall dimensions 205″x76″x115″
• Stationary platform with steps to go in between lifts for multi-bay operation 75″x97″ platform.

Mezzanine Kit (S100105)

• Fixed front Mezzanine with balcony stationary platform in front of lift 25″x128″ and balcony attached to front mezzanine 22″x69″.

Mezzanine Kit (S100106)

• Moving front mezzanine elevates and descends with lift 31″x101″.

Heavy Duty Four Post

Rotary’s heavy duty four-post lifts accommodate a wide range of vehicles with lifting capacities up to 60,000 lbs.

Available Models: 40000HDL, 50000HDL, 60000HDL

60000HDL

Standard Features

• Locking latches is each leg for maximum security
• Non-skid surface for sure grip
• Heavy-duty chains keep runways level
• Fully adjustable runway track width
• I-Beam construction in runways for maximum capacity
• Front wheel stops
• (2) 2HP motors and two cylinders
• 60,000 lbs. capacity

Options

• Rolling Jacks
• Alignment models
• Internal airline kit
• Drive-thru ramps
• Single and 3-Phase motors available
• 50,000 lbs. capacity model also available (50000HDL)

Available Models: 50000HDL, 60000HDL

 Alkota

Model # 4305X4

When you need high pressure, hot water, and mobility in one pressure washer, Alkota  offers you these two great machines.

The Alkota 4305-2T is a portable, gasoline powered hot water pressure washer that  delivers 4 GPM (gal per min) at 3,000 PSI. This machine comes is powered by a Belt  Drive 13 HP Honda Electric Start engine, Oil Bath Pumps with ceramic plungers, steel  pipe coils and stainless steel reservoir for quality and  durability. The Kero burner is  diesel powered with automatic ignition and raises water temperature by 125°F.

The Alkota 4405-F is also a portable, gasoline powered hot water pressure washer. It  delivers 4 GPM at 4,000 PSI. It’s powered by a belt drive 16 HP Vanguard electric  start  engine and also features Oil Bath Pumps with ceramic plungers, steel coil pipes  and  stainless steel reservoir. The Kero burner is diesel powered with automatic  ignition  and raises water temperature by 90°F.

Because of both their abilities and mobility, the Alkota 4305-2T and 4405-F are ideal   for cleaning  situations such as construction yards, salvage yards, hog and poultry   producers, and any other application requiring a highly mobile hot water pressure   washer.

Rotary Lifts

Pad Lift

Standard Features

• True asymmetric, with columns at rotated 30º. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column
• “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
• Pads allow for quicker vehicle spotting and greater vehicle throughput
• Single point lock release which releases the locks at the same time
• Two full stroke cylinders, one in each column
• Arm restraints on each arm engage when the vehicle is lifted
• Third party certified
• 7,000 lbs. capacity

Options

• Extended height
• inbay® (A7Pi) models include: Up/Down, lock controls on each column with air and electric outlets
• Heavy-duty wheel forks
• Magnetic lug nut tray

Available Models: SPOA82, A7Pi

2 Post Symmetrical

Standard Features

• True symmetric column design
• “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
• Single point lock release which releases the locks at the same time
• Two full stroke cylinders, one in each column
• Arm restraints on each arm engage when the vehicle is lifted
• Third party certified
• 10,000 – 12,000 lbs. capacities available

Options

• Extended height
• inbay® (S10i, S12i-RA) models include: Up/Down, lock controls on each column with air and electric outlets
• 3-stage arms for greater extension and retraction

Available Models: SPO10, S10i, SPO12-RA, S12i-RA

2 Post Asymmetrical

Standard Features

• True asymmetric, with columns at rotated 30º. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column
• “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
• Single point lock release which releases the locks at the same time
• Two full stroke cylinders, one in each column
• Arm restraints on each arm engage when the vehicle is lifted
• Third party certified
• 10,000 lbs. capacity

Options

• Extended height
• inbay® (A10i) models include: Up/Down, lock controls on each column with air and electric outlets
• 3-stage arms for greater extension and retraction

Available Models: SPOA10, A10i

2 Post Drive on Runways

Standard Features

• Drive-on runways allow for quick vehicle positioning
• No EPA concern – environmentally friendly and fully contained in a polymer composite housing
• 8 1/2″ diameter plunger
• Patented EasyAccess™ cylinder design – reduces service time up to 75%
• Third party certified
• 10,000 lbs. capacity

Options

• inbay® (SL212i-DOR) model includes:
• One touch power unit (mounted on wall or on a stand)
• Patented Liquid Detection System™ (LDS)
• Rolling Jacks
• Shorter runway model available

Available Models: SL212-DOR, SL212i-DOR

Model #: 990 - TECHNICIAN WORK BENCH WITH SHELVES

HEAVY-DUTY WORKBENCHES are made of rolled edge steel (for safety) and are powdercoated to resist scratches, chips and rust. Each has sturdy 10-gauge steel worktops that can handle the weight of even the heaviest parts and assemblies. Bolt-down feet for added safety. Thick wall rectangular tubular legs create the sturdiest bench on the market. Ships in wooden crate.

• 10-gauge rolled edge steel work top with 2″ retaining wall on sides and back (1750 lb. load capacity)
• Two 12-gauge steel shelves each with a 550 lb. load capacity

Model #: 992 - TECHNICIAN WORK BENCH WITH DRAWERS

HEAVY-DUTY WORKBENCHES are made of rolled edge steel (for safety) and are powdercoated to resist scratches, chips and rust. Each has sturdy 10-gauge steel worktops that can handle the weight of even the heaviest parts and assemblies. Bolt-down feet for added safety. Thick wall rectangular tubular legs create the sturdiest bench on the market. Ships in wooden crate.

• 10-gauge rolled edge steel work top with 2″ retaining wall on sides and back (1750 lb. load capacity)
• Two key-lock steel drawers with full-extension, ball-bearing slides
• One 12-gauge steel shelf with a 550 lb. load capacity

Model #: 994 - HEAVY-DUTY TEARDOWN TABLE

• Fluids drain through table top into a removable plastic container (included)
• Comes with locking storage drawer on ball bearing slides
• Multiple shelf locations give added versatility
• Square tube leg design gives added strength and stability to table top
• Large 4″ heavy-duty swivel casters (2 locking)
• Table top features 1/2″ rim
• Extra heavy-duty construction
• Capacity 1,000lbs.
• 47″W x 31-1/2″D x 39-3/4″H
• Shipping weight 249lbs.

STS-S1 (left) & STS-D1 (right)

Shure has various pre-configured workstations available or customize your own SHURETECH workstation by selecting individual components such as tool storage cabinets, storage cabinets, service reel cabinets, trash cabinets, cart lockers, sink cabinets and in-ground lift power unit cabinets. All lower cabinets are approx. 39 1/8”H. (Height includes leg levelers and bench top)

Features:

• Bench tops are stainless steel over wood core
• Stainless steel utility chase panel
• Wall-mounted upper storage cabinets with 2’ computer monitor enclosure that includes an articulating keyboard stand & mouse pad stand
• Lift power unit concealment cabinet compatible with Rotary and Challenger in-ground lifts
• Choose from 22 Shure Signature Powder Coat Paint Colors
• NOTE: Stainless steel bench tops must be ordered separately. Call for model numbers.

Samson Pump Packages

Used Oil Drain Units

Model 3736

Portable 18 gallon pressurized evacuation unit for suction of used oil. Complete with fill gauge, vaccum gauge, suction wands and connectors kit.

Model 1343

Economy Drain
5 Gal. Oil Drain, Telescopic Tube, Heavy Duty 12″ steel bowl. Extends to 65″

Air Operated Pumps for Oil, Grease, ATF and Fluids

PumpMaster 2

8 G.P.M. — 2″ Air motor piston — 4″ Stroke

3:1 Ratio pumps for oil distribution system

Ideal for use in oil distribution systems which include pipe lines, hose reels and meters. For portable and stationary systems, for all types of oils and gear oils.

Highly efficient and reliable, very low noise level, low air consumption.

Patent double action pump design assures even flow of fluid – only three parts in the air motor – quick and easy maintenance.

Precision corrosion resistant parts, high alloy materials, quality seals.

Heavy duty, distortion free pump tubes.

Model 200
Pumpmaster-2, 3:1 Ratio stub pump only with 2″ Bung Bushing Adapter. Outlet: 3/4″ NPT(F). Inlet:3/4″NPT(F), Air: 1/4″NPT(F)

Model 210
Model 200 plus Model 904 connecting hose hook-up kit.

Model 222
Pumpmaster-2 system for std 250 Gal. Work bench type tank. Includes the following:
•  Model 208: PM-2, 3:1 Ratio pump with 2″ Bung Bushing.
•  Model 904: Connecting hose hook-up kit.

Model 212
Pumpmaster-2 system for 275 Gal. oval or 500 Bal. round tank. Includes the following:
•  Model 213: PM-2, 3:1 ratio pump with 2″ Bung Bushing.
•  Model 904: Connecting hose hook-up kit.

Model 260
PM-2 (Pump Only) 3:1 Ratio, Fits 60″ Vertical Tank.

American Forge and Foundry

Portable Grease Units

5 GALLON PORTABLE WASTE OIL DRAIN

Model #: 8630

• Traditional gravity-fed portable drain adjusts to 72″ for shop use
• Five-gallon holding tank with 13-1/2″ wide drain funnel
• Four rugged casters
• Ship weight 15 lbs

8 GALLON POLYETHYLENE WASTE OIL DRAIN

Model #: 8870

• 8-gallon capacity
• Comes with 16.5″ funnel
• Extends from 34″ to 65″
• Metal trolley comes with 4 casters and pull handle for safe and easier movement around the shop.
• Ship weight 18 lbs.

Brake Lathes

Description: Model 2000 Brake Lathe

Specifications:Spindle Speed: 150 and 200 RPM, Spindle Travel: 6-7/8″, Rotor Width: 1-3/4″, Rotor Diameter: 17″, Drum Diameter: 6 to 28″, Drum / Rotor weight: 150 lbs, Shipping weight: 685 lbs Features:Turn rotors faster and get the best possible finish with the revolutionary variable speed gearbox. Specials:Bench and standard adapters are included with the lathe. Light truck kit available 

Brake Lathe – Combination Lathes

BL500 Series

Standard BL505 shown with optional
Digi-Cal* Measurement Caliper.

Brake Lathe Packages

		BL505-AB*– HunterPro Lathe Package With Bench Includes BL505 combination brake lathe, bench with backboard, chip tray, storage hooks and Standard HunterPro Accessory Kit #20-1690-1. Adaptors NOT included.
		BL505-A*– HunterPro Lathe Package Package contains combination brake lathe and Standard HunterPro Accessory Kit #20-1690-1. Adaptors NOT included.

To complete your HunterPro lathe package, select a required adaptor kit from the list below that matches your service needs. Each adaptor kit services most rotors, drums and flywheels.

HunterPro Level 1: # 20-1665-1
Passenger Car Adaptor Kit

HunterPro Level 2: # 20-1666-1
Passenger Car & Light Truck Adaptor Kit

QuickChuck Level 3: # 20-1667-1
Passenger Car, Light and Larger Light Truck Adaptor Kit

HunterPro Level 4: # 20-1668-1
Passenger Car, Light and Larger Light Truck Adaptor Kit